Camera and lens
Matched to your part size and the working distance on your line; global shutter keeps moving parts sharp.
Up to 12 MP · global shutter · C-mount
title 0.98
The plug-and-play AI inspection unit.
body 0.94
It catches defects, verifies assembly, reads barcodes, measures down to 0.01 mm and identifies the part; all five in one industrial enclosure.
Five AI inspection modes. One unit, one software.
From 20 reference parts
Anomaly & Defect Detection
Trains on good parts only and flags anything that deviates; known defect classes are reported with the class in the result.
Presence / absence
Assembly & Missing Part
Verifies every screw, clip and label is present and seated before the part moves on, learned from about 20 good assemblies.
OCR + barcode
Code Reading
Reads and verifies barcodes, data-matrix and QR codes as well as printed text at line speed, tying each code to the part result.
0.01 mm precision
Measurement
Dimensional gauging down to 0.01 mm: geometry, feature and hole position checked against the tolerance you set.
Confidence per part
Part Identification
Recognises the variant in front of the camera and hands the controller a program-select code with a confidence score per part.
01 / 05
Catalogue
Applications.
Part identificationPart identification on a skid
Recognises the body part arriving on a skid and tells the robot which program to run.
Automotive
Anomaly and defect detectionCap defect detection
Rejects cracked, unclosed and hinge-damaged caps on a high-speed conveyor.
Packaging · Food and beverage
MeasurementHole position measurement
Measures the position of a 6 mm hole to a 0.01 mm tolerance as the part passes.
Automotive · Metalworking
Anomaly and defect detectionSurface scratch and dent detection
Catches scratches, dents and surface disturbances on sheet and machined parts at line speed.
Metalworking · Automotive · White goods
Anomaly and defect detectionBurr and cut defect detection
Separates burrs, tears and incomplete cut-offs along stamped edges.
Metalworking
Anomaly and defect detectionCrack and tear detection
Catches the start of a crack and the thinning tear that follows forming.
Metalworking · Automotive
Anomaly and defect detectionWeld seam appearance inspection
Checks the seam surface for spatter, irregularity and interruption.
Automotive · Metalworking
Anomaly and defect detectionShort shot and flash detection
Separates unfilled regions and flash along the parting line on moulded parts.
Plastics and injection moulding
Anomaly and defect detectionSink and burn mark detection
Catches sink marks over ribs and the burn marks left by trapped gas.
Plastics and injection moulding · White goods
Anomaly and defect detectionPaint and coating defect detection
Separates dust inclusions, runs and orange-peel texture on painted surfaces.
Automotive · White goods
Anomaly and defect detectionSurface contamination detection
Catches fibre, dust, hair and oil marks on a surface that has to be clean.
Food and beverage · Pharmaceutical packaging · Plastics and injection moulding
Anomaly and defect detectionGlass scratch and edge chip detection
Separates surface scratches and edge break-out on transparent panels.
Automotive
Assembly and missing partFastener presence verification
Confirms every screw, clip and rivet is fitted and fully seated.
Automotive · White goods · Metalworking
Assembly and missing partConnector seating and pin check
Checks that the connector is fully mated, the latch closed and the pins undamaged.
Automotive · Electronics
Assembly and missing partGasket and O-ring presence
Checks that the seal is seated in its groove, neither missing nor twisted.
Automotive · Plastics and injection moulding · White goods
Assembly and missing partClosure presence and seating
Confirms the cap is fitted, sitting level and not cross-threaded.
Food and beverage · Packaging
Assembly and missing partBlister cavity verification
Confirms every cavity holds one intact tablet, with none empty or broken.
Pharmaceutical packaging
Assembly and missing partKit content and count verification
Confirms in one frame that the set is complete and no wrong part slipped in.
Pharmaceutical packaging
Code readingData-matrix reading
Reads the laser-marked code and ties the part to its own record.
Automotive · Electronics · Pharmaceutical packaging
Code readingBarcode reading and product verification
Reads the barcode on the pack and checks it against the product the line is running.
Food and beverage · Packaging
Code readingDate and lot code legibility
Confirms the expiry date and lot code were printed and can be read.
Food and beverage · Pharmaceutical packaging
Code readingLabel presence, position and content
Checks that the label is present, sitting straight and correct for the product.
Food and beverage · Pharmaceutical packaging · Packaging
Code readingSerial number matching
Reads the serial number on the part and matches it against the work order.
Automotive · Electronics · Metalworking
MeasurementEdge and profile measurement
Measures length, width and corner geometry as the part goes past.
Metalworking · Plastics and injection moulding
MeasurementGap and flush measurement
Measures the gap between adjacent panels and the step between their surfaces.
Automotive · White goods
MeasurementThread presence and pitch check
Checks that the thread was cut, the pitch is even and the first threads are intact.
Metalworking · Automotive
MeasurementFill level measurement
Measures the liquid level in bottles and jars and flags underfill and overfill.
Food and beverage · Pharmaceutical packaging
MeasurementLabel position tolerance
Measures label height and rotation and removes what falls outside tolerance.
Food and beverage · Packaging
Part identificationVariant discrimination
Tells near-identical variants apart so the line processes the right one.
Automotive · White goods · Metalworking
Part identificationWrong part and mix-up detection
Catches the foreign part mixed into the box or the tray.
Metalworking · Electronics
Part identificationOrientation verification
Confirms the part faces the right way and is not reversed or on its side.
Electronics · Plastics and injection moulding · Food and beverage
Part identificationColour and shade discrimination
Separates batch-to-batch shade drift and uneven colour within a part.
Plastics and injection moulding · Packaging
Part identificationClassification and sorting
Sorts mixed parts into their classes and routes each to the right lane.
Food and beverage · Metalworking
Part identificationPart counting
Counts the parts in a tray or box in one frame and reports what is missing.
Packaging · Metalworking
The unit
The whole inspection chain in one enclosure.
Camera, lighting, edge compute and software come off the same drawing board, matched to each other and to your part.
Lighting
Configured to remove shadow and glare from the surface you inspect.
Configurable color and angle · 24V
Edge compute
The model runs on the unit itself: ~30 ms per part.
NVIDIA Jetson class
Adente Vision Studio
Setup, mode switching and field teaching in one guided software; five modes ship pre-loaded.
5 AI modes · pre-loaded
How it works
From first call to live inspection.
Send a part or book a visit
A short call covers your part and your line; then send us a few sample parts, or we bring the unit to you.
The model learns your part
The model trains on about 20 good parts: it learns what good looks like, then decides pass or fail on your parts.
Decide on measured results
You see the catch rate measured on your own parts, at our bench or on your line, before any quote.
Connectivity
Speaks your factory’s language.
Your PLC receives a pass/fail result on every trigger, over the protocol your line already uses.
Connection options
- PROFINET
- EtherNet/IP
- Modbus TCP
- EtherCAT
- OPC UA
- Digital I/O
Do you build systems for factories? Become our solution partner.
Test the unit on your own line.
We bring the unit to your line; try it on your own parts, at your own line speed.